Deze gebruiker heeft hun profiel nog niet ingevuld.
Uitgevoerde reparaties
Vragen
The battery hold down lock in my 2006 core duo is defective. I do have a few nonworking 2007-2008 Core2duos at hand with...
Meer informatieiMac 21.5” does not power up, no chime is heard. I know that LED codes are: LED 1 on= trickle voltage from power supply is...
Meer informatieTrying to install Lubuntu 18.04 LTS in this Macbook to extend its useful life. Maximum it now has is 10.7 but that is...
Meer informatieThis Macbook Pro was given to me sans battery. Has a fractured LCD support frame but it works. I propped up the LCD lid on...
Meer informatieI was given a Macbook Pro mid2009 15” with fractured LCD supports near the base. Still works though, I propped up the...
Meer informatieMacAir 11'‘ Late 2010 with a bulging battery (keyboard puffed up). Charger cord shows a green light. It powers on with the...
Meer informatieFriend brought an early 13” 2015 Macbook Air to me. Dark screen but the image is there if I shine a flashlight to it. I...
Meer informatieI have been called upon to replace a bad 500 GB hard drive in a late 2012 Mac mini. I want to use an SSD as a drop-in...
Meer informatieRunning Yosemite with a half terabyte HDD. Laptop sometimes hangs, apparently not heat related. I have tried repairing...
Meer informatiePower Adaptor is connected, charging is normal (orange light is lighted on the adaptor connector). No signs of life and no...
Meer informatiePagina 1 van 6
Antwoorden
even after a lot of fiddling around, the methods above didn’t work for me. But I finally got to install Linux in the 2008 Macbook white! Here’s what worked for me: I installed the laptop HDD into my old Win7 core2duo desktop and booted off the Lubuntu 18.04 DVD I had. I installed the OS, then turned it off and simply transferred the HDD into my Macbook. And voila! My Macbook now boots into Linux! Everything works. I later installed LibreOffice and Zoom for Linux. LibreOffice was no problem, but Zoom asked for a lot of dependencies (Lintian, and dozens of other files that the installer fortunately listed). I am a very happy camper! Now to do the same for my other two Macbooks.
Meer informatieUpdate: I removed the bloated battery but still can’t boot from the SSD. It’s probably corrupted. So I booted from the USB stick I had for late 2010 Mac Airs and formatted the main drive (Mac OS Journalled). I tried to restore the OS (using Disk Utilities) from the hidden partition containing the factory disk image in it but still no joy. I ended up installing the original Snow Leopard OS from the USB stick into the main partition and now everything works.
Meer informatieSorry for the typo, it's 13" not 12".
Meer informatieProblem solved! I have done some more research in the past days and found that the format I did on the hard drive in target mode defaults to Master Boot Record (MBR). Powerbooks can boot only from drives formatted with Apple Partition Map (APM). So, I redid the erase command from Disk Utility and went into the Advanced options below the screen, selected one partition choice, clicked on APM, and proceeded to erase. A new cloning of the drive fixed the issue and now allows the Powerbook to boot from its own drive. Now to get a proper install disk. Yes, thanks for the tip, Mayer, I know iBooks and Powerbooks can be upgraded to Leopard if the processor runs 867 MHz or faster. RAM should be 1 GB or more to run them fluidly.
Meer informatieSorry for your iPhone, but if any work on it is done by anyone not authorized by Apple, the warranty is automatically void.
Meer informatieWell, I did boot up my powerbook in target mode, connected it by firewire cable to the iBook, power up the iBook and immediately pressed <option> key. Shortly, the ibook screen showed the 2 bootable OS'es. I chose the powerbook hard drive, but there's no change. The iBook screen still goes dark and the machine goes into hibernation. Looks like it's really a logicboard problem.
Meer informatieLaw of supply and demand. Black models were uncommon then, hence more demand when the lid and LCD inside need fixing. The innards, though, are no different than their white counterparts.
Meer informatieMost likely worst case scenario: dead device. Update: If you don't do it right, you could get the power leads or voltage to where they don't belong. Hence possibility of a dead device is strong.
Meer informatieOui, iBook G4 utilisent généralement une carte Airport Extreme. Espérons que cela résout votre problème. Vous pouvez les trouver sur ebay. La batterie doit être retirée avant d'installer la carte.
Meer informatieUpdate: A 600 MHz G3 iBook was brought to me. Symptom was it gets perpetually stuck in the opening screen with the Apple logo and spinning wheel icon on boot. Hard drive problem with OS, I surmise. So I connect it to my Powerbook via a firewire cable and boot it in target mode. It doesn't mount. So I launch Disk Utility and the bad iBook HDD shows up in it. I erase it with the Utility tools, and everything seems good. I try to clone my Powerbook HDD to it with SuperDuper! but after 80% of the process is done I get an error message and the process aborts. Looks like the target HDD finally gave up the ghost.
Meer informatiePagina 1 van 9
Commentaar Gids
The Mac Mini 2012 needed a Torx 9 screwdriver. Torx 8 was too small. I agree, no need to do steps 10 and beyond. Also, no need to do step 5 (remove the fan cabling). I see step 5 as a dangerous move that can damage the socket esp if the solder underneath has weakened. I merely set the fan away from the area where I needed to work on the hard drive.
Bernie
@bernie36975
1.281
Reputatie
82
Oplossingen
0
Handleidingen
Lid sinds 07/04/10
Stemmen
1
0