Hi is there not a accessibility option bottom right corner for on screen keyboard to use mouse with

While the maximum RAM limit for 32-bit Windows editions is 4GB, when it comes to the 64-bit editions, the amount of memory that the OS can address depends on which edition you are running. And number of slots available I believe yours is 2 slots Anywhere from 8-192 GB Ram But to be real 2x4 2x8 2x16GB ram

First step is does your device have a power indicator Lots don't. Have you tested the power cable on another device. usually tablet power connectors are mini or micro USB so you can try another phone cable on your tablet also it might not have as much power but it will trickle charge You say screen glitches if this only when power button is pressed would indicate low power Also check non of the USB or HDMI pins are touching on device will cause tablet to also cut out Sometimes simple things cause complicated problems

First step is does your power supply or device have a power indicator Lots don't. Have you tested the power cable on another device. usually tablet power connectors are mini or micro USB so you can try another phone cable or USB power adaptor on your tablet also it might not have as much power but it will trickle charges If screen glitches and this only when power button is pressed would indicate low power Also check non of the USB or HDMI pins are touching on device as can cause tablet to also cut out Sometimes simple things cause complicated problems

Are you checking hold switch and doing steps below 1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.) 2. Now press and hold the Menu and Select buttons until the Apple logo appears, which may take about 6 to 10 seconds. You may need to repeat this step''.

I would say remove any form of power main or battery Turn laptop back over onto side fluid entered so can run back on itself and exit If you are confident remove ram covers Ram some HD and CD/DVD drives can also be removed usually with 1 or 2 screws dab dry if needed before fluid dries as may become hard or sticky Spraying with an electronic contact cleaner or alcohol based to stop corrosion later . Leave to dry for some days maybe in airing cupboard someware dry not hot . When powering back up leave all items above removed were just looking to see if it powers up think battery might be best first option as lower power level and AC rather than hitting it with DC higher power level. Then power down add ram boot up again power down add CD/DVD boot again Now was thinking might be worth running live Linux disc before adding hard drive to test USB sound and anything else you can think of Not sure if it would just be wasting time or a good way of testing before adding hard drive Before this step might be worth...