Deze gebruiker heeft hun profiel nog niet ingevuld.
Uitgevoerde reparaties
Vragen
I have a MBP from a customer which had the logicboard exchanged recently (NVIDIA issue). Customer complains that the USB...
Meer informatieHi, i've already read the related answers but that doesn't adress my problem. As i stated, the sensor sometimes switches...
Meer informatieMy nuclear reactor is overheating due to the lack of electrical power to run the pumps. What is the best measure to take?
Meer informatieMy girlfriends Win7 machine started acting up lately. Firefox kept crashing, espacially with Flash plugins running...
Meer informatieI have the metioned iMac here where i replaced the optical drive. I tested it (with the front bezel off) and everything...
Meer informatieSorry but i have to mention this. This site i always understood in a matter like "help yourself, then help others". It...
Meer informatieThere is a lot of discussion all over the web about it, but i couldn't find a solution yet. When i try to erase or format...
Meer informatieThe power LED lights up, drawer works perfekt, i can hear the disk spinning inside. But nothing on the display and no...
Meer informatieAntwoorden
You can exchange single keys, providing you have access to a 2011/2012 US keyboard. The little siccors under the keys are different to the 2010 and earlier models. A topcase replacement with the proper american (small) Enter key would be the most expensive option.
Meer informatieIts a 4 point ZIF socket, but I don't know where to purchase one. Even if you get one, maybe salvaged from a busted board, it'll be still a !#*^ of a job to solder it on. You can always fit the keyboard sans backlight.
Meer informatieThe superdrive is connected via SATA. There are companies selling drive bay kits, just google it. IMHO it is better to replace the startup disk with the SSD, put your system and apps on it and put a beefy data disk in the optical drive bay.
Meer informatieDisconnect the power cord. Remove the user access panel from the bottom of the computer. Press the PMU reset switch once on the bottom side of the logic board. Do NOT press the PMU reset switch a second time because it could crash the PMU chip. The switch is near the memory slot, next to the airport card. Wait ten seconds before you connect the power cord and keep your fingers crossed.
Meer informatieYou'll have to find out wether the machine charges the battery at all. If you have access to a multimeter measure the charging pins. The two outer ones are gound, the three inner ones should read something around 3.58 V each. If that is not the case you'll have trouble with the SMC (more likely and more troubling) or the DC in (Magsafe) board which is rather unlikely since your machine powers up on AC.
Meer informatieGreat Guide to removal of the glass here. The spare parts you might find on ebay.
Meer informatieI suspect a broken screen and/or LVDS cable.
Meer informatieSometimes the little cushion on to of the LVDS (video) cable causes issues. Try if removing it solves the problem.
Meer informatieI swap drives all the time and it always works. When you start up a foreign drive the boot time is a bit longer but you should be alright. I have a bunch of test disks with systems on that i use for troubleshooting and never ran into problems.
Meer informatieSeems like your backlight is broken, as you already suspected. You'll might a secondhand screen on eBay a little cheaper.
Meer informatiePagina 1 van 45