400 and 800 firewire ports dead or low powerI am running 10.4.11. Firewire 400 will not power up or allow computer to recognize my I sight camera or power up firewire ex...
Heeft geantwoord op: My monitor screen is black on my Nikon D5300Have you tried resetting the camera to factory default settings? You may have inadvertently changed settings
Heeft geantwoord op: 400 and 800 firewire ports dead or low powerI wonder if you've spilled some liquid at some time onto your firewire ports while the laptop was powered up...common method of short circuiting the BUS which controls the firewire ports....a question...is your wireless signal strength bar still showing on the menu bar? they are both related...if that wireless signal strength bar has disappeared and your firewires have no power...the BUS on the logic board that controls them might have shorted. If so, a new logic board or second hand one is the only way. If you do that, make sure you are careful with the ambient light sensor when you remove it...very delicate and easily damaged...it controls signal to backlighting of your keyboard... Many of those external hard drives wont get enough power from your usb...the one on the left is high speed ....if you were to connect to both usb on left and right then there should be enough power....firewire 800 or 400 supplies power to external drive or isight camera if functioning. The most concerning part of no firewire is t...
Heeft geantwoord op: 400 and 800 firewire ports dead or low powerneither will power the drive though I can power it up with the two usb ports 2.0 and the 1.0