I needed to replace the charger port for an iPad 6. This guide, plus a youtube vid on how to replace the charger port helped me achieve this last night.
Thanks for the detailed instructions!!!
Thanks for the guide. I was able to replace my wife’s shattered digitizer on her iPad 6th gen!
Thanks, I was able to fix my wife’s shattered digitizer screen on the iPad 6th gen with this guide!
Yep, tore mine even as delicate as could be. I would highly recommend hitting the home button with a heat gun prior to attempting to remove. On the plus side, the replacement gaskets are cheap and easy enough to replace.
I believe these are also Phillips #00, not Phillips #000.
You forgot to include removing the middle screws from both sides of the rails and also removing the screw from the SD card (As well as the SD card module itself) BEFORE removing the shield plate. I would also throw in a caution about removing the battery if you aren’t going to use the adhesive removal solvant as one could potentially damage the on board battery connector or the ribbon cable, depending on what they use to pry the battery out of the case. Other than that, great guide and it helped me to replace my battery w/o issues.
Zodra ze een reputatiescore hebben bent je in staat om een grafiek te zien van het verloop hiervan.
Hier is een voorbeeld van hoe de grafiek eruitziet:
Nog geen reputatiescore gekregen.