Leider ist die Platine mit dem Triac komplett vergossen.

Diese Maschine hat gerne ein Problem mit der Geschwindigkeitsregelung. Fehler ist eine defekte Spule / Induktivität mit 4700uh. Lösung gibt es genug im Netz: https://www.youtube.com/watch?v=TJ040xgP...

Hi, yes the spring and the steelball comes from the Speedcontrol. There must bei an hole for the spring. On the top of the spring shut be the the ball. ... to click click click in the Control button.

470uf 250v x2 capazitator

3A 1000v diode

I dont know. It was not my toaster and i have no better pictures. Are you sure that the ic is broken? What´s your problem with your toaster?

https://dertoaster.org/toasterreparatur....

Perhaps it is the 8a2511, but I am not sure. Please check the connetcions first. You can get this ic from a lot of toasters with 3 buttons. Look for an broken toaster with 3 buttons at the e-waste.

If the windings are broken you need an new motor. Perhaps only the surface of the comutator ist durty. Then you can clean it with fine sandpaper.

Hi Angus, okay, just an idea!

The heatingwire is shortet > the voltage on the board is to high > First check the resistenc of the heatingwire an calculate the watt. Compare it with value of the producer writen on the toaster. Then check the AC 12V on the board. Be careful!!!

Perhaps you can go to an Repair-Cafe in your town.

Hi Angus,

it is an 1N4007 Diode. But I think that de IC is also broken when the diode ist broken. The AC could destroy the IC.

Look at this datasheed and the typical electrical use in a toaster. https://www.digikey.ca/en/htmldatasheets...

good luck and give me a feedback. www.dertoaster.org

Hallo VauWeh, richtig! Da habe ich mich vertan.

Akku SoundCore2

Kapazität 2600 mAh Leistung 19.24 Wh Spannung 7.4 V Typ Li-ion