Reseat Battery and Cables 1. Shut down the laptop and close the LCD screen. Remove the AC power cord and other cables from the laptop. Flip the laptop over and remove the battery pack. 2. Use an eraser to clean the metal contacts on the battery and the battery bay. Remove any tarnish or build up that may appear on the contacts. Blow the excess eraser bits from the battery and the battery bay. 3. Reinsert the battery into its bay and reconnect the AC power cord and other cables. Ensure that the cable connections are tight and that you lock the battery in its bay. 4. Power on the laptop and check to see if you can see an image on the display. Reseat Drives and Memory 1. Shut down the laptop, unplug the AC adapter and close the LCD screen. Flip the laptop over so that it is upside down. 2. Locate the cover for the memory module. On most laptops, the memory slot cover has a small icon picture of a memory stick or label. Remove the screw that holds the cover in place with the Phillips screwdriver. 3. Insert...

And if you really think about the above situations, then here is the answer:- 1. Dirty Fan/Overheating One of the first and most likely reasons your computer is shutting off randomly, especially when you’re playing a game, is an overheating issue. This is the bane of most computers, especially laptops, since the heat has nowhere to go. Fans that are in peerless working order are critical in aiding this issue. This is such a common and important issue in fact that most computers now have a built-in mechanism that will shut off your computer if any of the components become too hot. Consider this your fairy mother protecting your expensive electronic device. What you want to do to overcome this is to figure out what is causing the heat, and dirty fans are most likely the culprit. You’ll want to “look at your video card fans, case fans and processor fans” to see if any of them are squealing. If one is, that probably means one of them is broken. When looking at the fans, “take a moment to clean them” and to do...

Have you check these things on your laptop? 1. Do you check dirty fan/overheating? 2. Do you check any hardware failure? 3. Do you check wrong charger voltage? 4. Do you check display driver crash? 5. Do you check computer virus?

First, disconnect any external audio devices from your computer. Also disconnect any cables from the USB, FireWire, or 3.5mm audio ports. From the Apple menu, choose System Preferences. Select Sound. Click the Output tab, then select Internal Speakers. If you don’t see Internal Speakers as an option in the Output window, contact Apple Support. If the volume slider is set low, move the slider to the right and test again. If the Mute checkbox is selected, deselect it and test again. Back up all data before making any changes. 1. Start with the above recommended steps. Don't skip any of the steps. It's the starting point for further efforts to solve the problem. 2. Make sure you have a fully up-to-date installation of OS X. 3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem,...

Solution one: Turn the printer off and then on again Turn off the printer, and then turn it on again to reset the print mechanism. Step one: Turn the printer off and then on again Press the Power button to turn off the printer. Wait 60 seconds. Press the Power button to turn on the printer. NOTE:The printer might go through a brief warm-up period. Wait until the warm-up period finishes before you proceed. Step two: Print a Printer Status Report Print a test page to make sure that the printer hardware functions properly. Load Letter or A4, unused, plain white paper into the input tray. On the product control panel, touch the Right Arrow () to display the second navigation screen. Touch the Setup icon (). Touch the Down Arrow (), and then touch Reports. Touch Printer Status Report. The self-test report prints. If the self-test report prints, try printing the original document again. If the issue is resolved, there is no need to continue troubleshooting. If the issue persists, continue with the next solution....

Go to Search, type power options and click on Power Options from search results On the left side of the window click on Choose what the power button does If needed, click on Change settings that are currently unavailable, under Define power buttons and turn on password protection From the enabled options under Shutdown settings section, uncheck Turn on fast startup (recommended) checkbox to disable Hybrid Shutdown. Click Save changes button to save the modified settings. Close Power Options window when done. It is recommended by Freddie1000 I am not sure this is worthfull for you or not but you can try atleast once.

0xc000014C error screen on startup Alternative Info error messages. Your PC will probably display “Info: An error occurred while attempting to read the boot configuration data.” with File: as “\Boot\BCD”, but users reported others, such as: File: \Windows\system32\config\system Info: Windows failed to load because the system registry file is missing or is corrupt Info: The Boot Configuration Data for your PC is missing or contains errors 0xc000014C error screen Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance File: \Boot\BCD Status: 0xc000014C Info: An error occurred while attempting to read the boot configuration data. The Windows 8/10 info message looks like this: Windows Recovery Environment...

May be here is the solution, please see it.... https://discussions.apple.com/thread/417...

Cover the area near the camera (this is where the light sensor is) and press the F6 key again. It should work now. The reason why it isn't working in areas with natural light is that your computer KNOWS you don't need it. To change this, so you look super fly with your lit up keyboard, (and unnecessarily drain your battery) head on into your settings, and uncheck the selection that says "Adjust keyboard settings in low light". Then you can look super cool at Starbucks drinking your tea latte with your lit up super fly keyboard, in the middle of the day. Hope this helps!

Dear one, It could be a SIM failure issue. Reset the network settings on the iPad and see if there will be service coming up. If there is still no service i'd suggest testing the SIM in another device just to confirm and get a SIM replacement done....when you done this then ping me on the same.....thanks