no you cant think about it did the factory have any of your apps or pics or music no they didnt so if you reset it to factory defaults its like you just got it brand new in the box

Well make sure the bell housing bolts match the pattern of tranny and ujoints match. And the shifters are on correct side if there in a transfer case make sure it matches the bolt pAttern too they useally have a 203 or 208 transfercase on them

Put it on your computer mske a file. And zip it into the format your sons device reades unzip file put it on another memory card and that should work good luck

Unplug remove battery hold down power button for 30 seconds grab a door knob to make sure to discharge any static from your body tske paper clio and look i side usb and strighten all the pins. That should work if n o t replace usb port its shorted out

there is a method that uses a pattern of tightening the spokes and you have to get the pattern from who ever made that rim some use a four spoke pattern while some use a three spoke pattern and the easiest way to get to your spokes is take the tire off the rim and take the rubber used to protect your tube off and the top of the spokes has a standard screw driver slot that way you can mark the spokes with a marker of the pattern you need to follow and you can use a cordless drill and this way is much faster than a spoke tool that's my opinion any way hope this helps you good luck this is not a easy task thanks Matthew Walter Phx Az