Smart Phone/Small Electronics Technician, I also have a background in Electrical Engineering and IT. I have been fixing Smart Phones and Tablets professionally for nearly 10 years now. Working on all types of devices.
Vragen
In my line of work, which involves repairing phones and tablets, I've recently encountered a recurring issue with the...
Meer informatieHad a dead flat tab s3 come in for a charging port replacement, Changed port, textbook job, original port was quite messed...
Meer informatieSo I did the screen and charging port on a Note 8, everything went fine but the customer came back and is stating that...
Meer informatieHi Short story is, phone got dropped, screen replaced and neither camera is working, assuming the cause was the impact as...
Meer informatieI have an ee-mt800b dock by samsung and its not displaying on the TV (Yes it is a 4K TV), it works with a mouse and...
Meer informatieHi, I have made a back up of a Samsung J5 and I require the data in a more universal format, specifically the contacts. At...
Meer informatieHey Peeps, I have an 2005 Mazda Premacy and the central locking doesn't like working, it may work 1 out of 10 times but...
Meer informatieHi I have a Samsung T800 tablet and which is having some serious trouble charging. It originally had a damaged charging...
Meer informatieI have an LG Nexus 5 with a real bad feedback issue when on loud speaker and I believe I have found the issue. There is a...
Meer informatieAntwoorden
Ended up being the PMIC was damaged by improper charging, got pmic replaced and all was well.
Meer informatieHi, I know this is a super old thread but people are still rocking these... pun intended... the pod draws 0.01a constant have changed pmic, fuse is good, battery is goodish - not new but was working in another pod, still will only draw 0.01, when I charge the battery pod works fine, has connect to itunes but will sit there over night, just wont charge. Anybody have ideas I can try?
Meer informatieI found this happening after installing a Bluetooth replacement home button on an iPhone 8. The problem I had was the phone was thinking the home button was a Bluetooth keyboard and hiding the on-screen keyboard. The work around I found was to hold the home button down for a few seconds to bring up the keyboard. Hope this helps.
Meer informatieSo Daniel, how did you fix your 3600 issue. This site is powered by others posting their findings, so if you have found the result for your issue then sharing it would much appreciated by many who use this site.
Meer informatieJust putting it here because I had an 6s with the same issue and found that the culprit was the aerial jumper linkage in the top left of the phone, doesn’t look faulty but there was a definite resolution of the signal issue when it was replaced. It was initially very dirty so I cleaned it the first time but didn’t help. So if all else is failing then this might be just the answer you are looking for.
Meer informatieThey say this as the devices are made to be used with normal batteries and rechargeable's have a slightly higher amperage and voltage so the can theoretically damage a device but many years ago i had a GB colour and used it with rechargeable's and never had any issues. But I stress that it is at your own risk if you do use rechargeable's.
Meer informatiehttp://www.ebay.com.au/itm/Genuine-Samsung-Galaxy-P550-Galaxy-Tab-A-9-7-T533-Tab-4-10-1-Battery-Connector-/331788828352?hash=item4d4027bec0:g:~CUA... is the part you need it will require some soldering skills to install without damage. Good luck
Meer informatieNintendo DSi XL Microphone Replacement There is the iFixit guide for the microphone but I would place my money on it just being unplugged. Good luck.
Meer informatieYou need to replace the screen, The LCD ( the bit that produces the pictures) will be broken. If you're doing this yourself and is your first attempt, go slow and follow a guide otherwise it will be cheaper to buy another device than pay someone to do it for you. Good luck
Meer informatieSorry mate but I doubt that you will find just the controller, generally the frequencies are hard bonded to the individual vehicle, this allows two of the same vehicles to be used at the same time without interfering with each other. Your best bet is to either repair the old one or find an old controller and tune the frequency to match the vehicle. Good Luck
Meer informatiePagina 1 van 7
Commentaar Gids
How so? Enlighten us if you would be so kind good sir...
Hortman
@hortman
1.059
Reputatie
69
Oplossingen
0
Handleidingen
Lid sinds 12/03/15
Allround tech
Stemmen
1
4