Pieter

Hi, I ripped the flex cable from a home button for an iPad A1893 (iPad 6). I wanted to replace the button and I was...

Hi, I have an iPhone 6 which has bad top speaker quality. I tried a new speaker as well as a new front-camera assembly....

Hi, I have an iPhone 6s problem. The home button is not working, the touch id works, but the clicking itself does not....

Hi, Recently I was repairing an iPad and I had ordered a cheaper digitizer because the oem’s were sold out. Now I noticed...

Hello, so i bought a P9 and the woman said that it would not connect to the network, but that the phone still read the...

So I replaced the battery of a 5s, worked great for 3 days. On the 4th day, it started robooting by itself. You get a...

Does somebody know how to replace the audio jack on the first ge ipod nano? I think mine is broken, because it loses it's...

Hi, I was wondering what would happen when you replace a logic board on a iPhone 5s... What is on that logic board? Is the...

Hello, So recently I bought a second hand iPhone wich needed a new battery... So I thought this was an easy fix, but when...

Turns out there was a lot of dust in the speaker mesh. Blew it out, everything is good again.

Just ask for a replacement…

So I had the same issue, I was able to fix it by following something i found on a forum that was mentioned here. See this diagram

Hello Amy, it's absolutly possible to do it yourself. Just be patient and don't force anything. You can follow the steps here on ifixit. However, they only replace the screen itself. So you will have to glue the new screen to your frame. This is a annoying process and i would suggest that you order a lcd that is already installed on a frame. I have a P9 wich needs a new screen as well. This will be the fifth P9 I repair so I already have some expierence. If you want I can document or film the repair. Just let me know what you want to do.

Hello, can you describe the situation. When did it start? Was the phone broken? Have you had it repaired?

Hey, you could indeed try to reset it. But I don't think that will help. While replacing the lcd did you disconnect the camera?

Ok after some further searching I found a set. If anybody else needs them -> http://www.aliexpress.com/item/1-Set-for-iPhone-5s-100-Brand-New-Inner-Accessories-Inside-Small-Metal-Parts-Holder-Bracket/32240202172.html?spm=2114.010202...

Hi Luke, Sorry for the late response. I had not seen your reply. It’s definitely going to be hard if you want to remove the glass in one piece.

Please let us know if it worked out for you. Good luck

Maybe the new lens is of a lower quality?

Took me almost 2 hours, but in my opinion it's not 'very difficult', it's not easy but it's doable for sure.