Deze gebruiker heeft hun profiel nog niet ingevuld.
Pagina 1 van 3
If new battery was criticality low in charge, it will boot loop. Put iPad in freezer for 30m and immediately plug to charger when you remove it. Reason: too low % on battery after repairs won't allow to boot so loop occurs and you can't charge a device in a boot loop. Freezer forces an emergency shutdown and will stay off till temperature is normal by then you should have enough charge to boot. Hopefully this helps!
If your screen is broken or shattered there are no worries with the digitizer cable, It is all on the new screen.
Also once it is unattached from the front panel, if the antennas adhesive touches the glass again it can re-adhere to front panel and may rip apart after all. Keep a close eye on it or leave a pick or card in there to prevent it from re-sticking.
@mr_hitech
35
Reputatie
8
Oplossingen
0
Handleidingen
Mr. HiTech iRepair
A home based mobile device and computer repair business...
11
0
