Majesty

Ok, I bought a soundbar similar to a Vizio Soundbar from eBay and after my friend heard the soundbar he went ahead and ordere...

Ok I have an HP Mini which had a bad SSD. I replaced the SSD with a similar one, but I have been unable to install Windows to...

Ok, I thought I was clear and ready to repair these sunglasses myself but I was wrong. I sent them in to repair in Italy and ...

I have an external drive with 2 partitions; one for SuperDuper, and one for time machine. I have used AppleScript to automati...

I was wondering if anyone knew of a site where we can find the part numbers of specific mac parts? Sometimes Mac parts look v...

Ok, here goes: I used Dasboot to create a bootable Flashdrive with Diagnostic and repair utilities. The installation went fin...

Ok, I have this Gateway MA 2 Laptop, which I wanted to do some upgrades like RAM & HD and software upgrade. But, when I try t...

Ok, so I'm trying to recover files from a crashed drive on Windows. When I try to access the drive's contents, I get an error...

I upgraded to a 7200RPM drive last night and used superduper to clone the old drive into the new one and just swapped drives....

I just recently purchased Apple's in-ear headphones. Not the ones pictured here, but the ones with the rubber noise canceling...

David, I would dry a PRAM reset before declaring it defective. Sometimes this forces the machine to recognize new hardware. Also, what do you see under System Profiler under bluetooth? Anything there?

With the drive containing the TimeMachine backup connected, simply navigate to your Utilities Folder in Applications and look for Migration Assistant. Open that and it should automatically find the TimeMachine Backup and allow you to restore your data. Good Luck.

Have you tried reinstalling a fresh copy of OSX? I would try that first. If that doesn't help, you might be looking at replacing the airport card on your macbook. It has an antenna for WiFi and bluetooth as well. Luckily, it's pretty straight forward replacing this card and requires minimal experience. Just look at the repair guide here for your specific machine.

Seems like you have tried all the obvious fixes first. The problem may be on the Logic Board where the Home Button makes contact with the Logic Board. Has this device suffered water damage? I would take the device apart and focus on that area where the home button communicates with the logic board and try cleaning that area thoroughly with Alcohol. You may have some debris in there thats jamming the contact up.

If the drive is not formatted for OSX, it will not be read by your system for installation. Use disk utility to partition and format the drive to HFS+ extended(journaled) and Guid Partition table as your partition scheme and u should be good to go. If this doesn't help, try Dan's suggestions. Good Luck.

Andrea, there's an existing thread on this topic already. But, replacing the card alone won't be enough. You would also have to swap out the antennae, as the ones in your machine aren't capable of providing the throughput that this card is capable on handling. Also, I would believe the firmware would have to be adjusted/updated in order for the card to function properly. In other words, the upgrade, even if it physically fits, won't provide you with any benefits as far as your Wifi performance goes.

Bring up Control Center by swiping upwards from the bottom of the screen. In Control Center, all the way up top where the wifi, bluetooth, etc, setting are you'll see the orientation lock icon there. Just deactivate from there.

Honestly speaking, microwaves aren't really user-friendly as far as repairs are concerned. Only a trained and well qualified technician should attempt any repairs on these machines. They're very dangerous, so please don't attempt any repairs if you are not a trained technician.

Emil, go with a reputable vendor offering a reliable brand, which will most likely offer lifetime warranty on your RAM. Corsair, Kingston are good brands.

Sì, è una possibilità. Swaping fuori un bordo DC con uno di maggiore tensione può sicuramente friggere la vostra tavola. Io non consiglierei di acquistare un'altra scheda DC per il modello di come potrebbe essere già troppo tardi. La tensione maggiore potrebbe avere amico componenti chiave sulla vostra tavola.