Deze gebruiker heeft hun profiel nog niet ingevuld.
Antwoorden
Have you tested to ensure this isn't a GPU problem. It doesn't seem likely but ALWAYS do the simple things first. Plugging in a friends monitor of high refresh rate will rule that out. If its good then... An educated guess here would be the controller for the monitor may be dying. The monitors like your PC have a "CPU" and they can fail. It may be a re-driver (used on devices to set screen resolution and refresh rate) issue for the screen or some type of TCON style controller. The main problem here is it may be a hardware issue that would require a board replacement.
Meer informatieThe simplest options are 1. Try a new sim card. Even though sim cards don't normally fail it is possible. Most post paid accounts offer free sim card replacement. Prepaid may require you buy a sim kit. 2. Try resetting network settings on the phone. 3. Possibly hardware issue with the charge port or antenna.
Meer informatieTry creating a bootable USB on a working mac. If you are unable to find it through apple the best outside option is through DosDude's website. He made a convenient package that allows you to download the firmware outside of Apples ecosystem and create a bootable installer. We have seen some odd hardware issues that can cause the computer to not properly install MacOS but I don't think that is the issue here. As far as I understand Recovery mode does not run off external GPU but off the integrated graphics.
Meer informatieThe fuse looks like i might be lifted for the back light. Can you lift the black plastic cover for the LVDS connector. Need to see the LVDS connector trace.
Meer informatieDid this item see liquid? Sounds like what happens after liquid has hit the keyboard.
Meer informatieOn the newer iPhone 6 they have a BGA chip that controls the vibrate motor. I would assume the 5 also has this same control chip. UPDATE looks like the U9 chip on the board controls the vibrator voltage output. Its a 4 ball BGA chip. This may or may not be faulty.
Meer informatieDepends on how they designed the s6 Edge. The older Galaxy phones had removable boards for the sim tray but they also have had models were it is directly soldered on the main board. The phone will have to be taken apart and then if soldering is needed it will need to be removed and a new port put back on. This is not a task for amateurs. UPDATE The S6 Edge Sim tray is indeed direct soldered to the board.
Meer informatieIf it fails restore you need to use the iTunes code to get an idea of what part of restore it fails. Most of the time I see baseband failures..
Meer informatieMost of the time you can search ebay or amazon for replacement parts. If the port is soldered to the board and isnt on a separate break out board you will have to desolder it to replace it. This requires a decent amount of soldering skills.
Meer informatieCould be a battery going bad or possible damage from the drops. Start with a new battery.
Meer informatiePagina 1 van 8
chriswku03
@bcconnection
675
Reputatie
79
Oplossingen
0
Handleidingen
Lid sinds 06/17/15
Team
B&C Connection LLC
Electronics repair from Phone to tablet and Laptop to...
Stemmen
8
1