No need to get it from Apple Self service. Much easier from here:

https://techtoro.io/macbook-air/genuine-...

GENUINE INPUT/OUTPUT (USB-C) BOARD A2337

Product Code: 923-03553

T4 is a better fit

Add this to your tool Kit! Precision T1 Torx Screwdriver, JAKEMY Professional Electronics Repair Screwdriver, Reinforced S2 Tool Steel

https://a.co/d/hqDGzdz

https://beetstech.com/product/mac-pro-a1...

Step to remove Lid Angle sensor is missing! The removal of the Lid Angle sensor and connecting a new one that is paired and serialized by Apple configurator is necessary if replacing the LCD. If you Purchase an LCD assembly from the Apple Self Service Store, it comes with a paired Lid Angle Sensor. You will need a P2 driver to remove the screw and cable with sensor.

TOM...on the 2019 5K 27" IT'S NOT a BR2032 battery!! It's a smaller diameter Panasonic BR1632A. You will break the cradle that holds the battery if you try to force in the bigger sized BR2042

on reconnect, there is very little length to play with on cables for these two push connectors. When re-connecting, leave 2 antennae T5 screws on step 25 loose in order to guide cables on and push them down onto connectors. Then finish tightening T5 screws on the antennae.

Don't forget Mic Array cover with 2 T3 screws. Located along left forward edge!

Purple one is a T6!

when I replaced HD, I used Capton tape to Supplant black adhesive strip that had lost its stickiness.