Ga door naar hoofdinhoud
« Terug naar alle verhalen

Great part great instructions

mroy006 -

MacBook Pro 13" Unibody Mid 2012

Afbeelding van het verhaal

MacBook Pro 13" Unibody Mid 2012 MagSafe DC-In Board Replacement

1 uur

Difficult

Mijn probleem

Original connector was visibly damaged when I purchased laptop years ago used. It worked but always made me nervous. Replaced MagSafe brick and this dc connector and it’s like new again.

Mijn oplossing

Easier then I thought. Just tedious work with the small screws and small connectors.

Mijn advies

Follow instructions step by step and pay attention to how each connector is removed so they are not damaged. Also when removing my main board, the side closer to the external connectors was stuck because of the adhesive on the underside speaker. Took my time rocking back and forth until it was free.

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board Afbeelding
MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

$9.99

« Terug naar alle verhalen

0 opmerkingen

Voeg opmerking toe