iPad mini 2/3 LCD

  • iPad mini 2/3 LCD
  • 360°
360
iPad mini 2/3 LCD

US$ 99,99

US$ 99,99

We zullen een bericht sturen als het product weer op voorraad is.

Productdetails

Beschrijving

Beschrijving

Fix problems with a flickering or dark display or missing pixels by replacing a malfunctioning LCD display screen. This part is compatible with a 2nd or 3rd generation iPad mini Retina.

Compatibiliteit

Compatibiliteit

  • iPad mini 2 A1489 and A1490
  • iPad mini 3 A1599 and A1600

Specificaties

Specificaties

Part #:
821-1805
Size:
7.9"
Display Panel:
OEM - Refurbished
Resolution:
2048 x 1536 pixel (326 ppi)

Compatibiliteit

iPad Mini 2 LTE
128 GB
16 GB
32 GB
64 GB
iPad Mini 2 Wi-Fi
128 GB
16 GB
32 GB
64 GB
iPad Mini 3 LTE
128 GB
16 GB
64 GB
iPad Mini 3 Wi-Fi
128 GB
16 GB
64 GB

Nog 1 apparaat tonen

Reparatieverhalen

Gebruikersavatar
Jim Dutton's Story Photo #1180608
Jim Dutton's Story Photo #1180609
Jim Dutton's Story Photo #1180599

Mijn probleem

Front panel was severely damaged and needed to be replaced. In repairing that issue, removal of the LCD resulted in two LCD screw tabs being broken off so had to replace the LCD as well.

Mijn oplossing

Separation of all adhered components was an unexpected experience of EVERYthing being "glued" together - especiall . . .

Gebruikersavatar

Mijn probleem

My iPad again failed due to a weak outer frame and parts that are so weak because they have to be so small for today's current human being to be able to lift it off the table that I am fixing it again. I have no idea what happened this time but some icons would not activate unless I rotated the scr . . .

Gebruikersavatar

Mijn probleem

Display was not working anymore

Mijn oplossing

SUPER! Such as described in the i-fixit-manual

Mijn advies

No advice

Gebruikersavatar

Mijn probleem

Touchscreen was broken beyond functioning. LCD looked ok, but maybe had hairline crack.

Mijn oplossing

Taking old touchscreen off was not too bad, but glue was very difficult at top edge. I had to keep reheating. The iFixit instructions have many steps for trying to preserve the touchscreen, but most of the time . . .

Gebruikersavatar

Mijn probleem

Original problem was that glass on the front of the iPad broke.

Mijn oplossing

The repair on the screen went very well until attempting to remove the LCD. The bottom of the LCD was very difficult to remove during the first disassembly. While gently pulling up on the top of the LCD, the bottom was stuck, causing to . . .

Gebruikersavatar

Mijn probleem

ipad went into the water during a boat race. would boot but screen was grayed out

Mijn oplossing

many small pieces and screws, otherwise ok

Mijn advies

.

Geef meer weer