Why has my order been processing for a while now
My order has been processing for a while should I cancel and reorder?
Weergave:
Niet-toegelaten stemmenIedereen met meer dan 20 reputatie kan problematische opmerkingen en berichten markeren.
Geef details weer
Rep: 33
Gepost:
My order has been processing for a while should I cancel and reorder?
Geef details weer
Dominik Schnabelrauch @schnabel
Rep: 208k
Gepost:
Gepost:
Wie muss man nur sowas bescheuertes konstruieren?
Geef details weer
Rep: 22,6k
Gepost:
Kann sein, dass sich deine Software aufgehängt hat. Kannst du das Telefon neu starten? Bleibt das trotzdem so?
Geef details weer
Rep: 49
Gepost:
Hi all, I recently got a broken macbook pro from my cousin for around 100$. I opened it and saw lines going all up in down the screen. I assume it’s cracked or something. I want to use this on the go and not stationary with a big monitor. This is the picture I took for reference. What’s my diagnosis?
Geef details weer
AntonioBiscuit @antoniobiscuit
Rep: 6,1k
Gepost:
Rep: 1
Gepost:
Pour le Vito 110 CDI 2001 c le 2.2l je ne trouve pas le papillon dair
Geef details weer
Nathan Albertson @nathanalbertson
Rep: 791
Gepost:
Rep: 1
Gepost:
Do you have a source to purchase oem parts? (Those other than digitizer and keyboard)
Geef details weer
Nathan Albertson @nathanalbertson
Rep: 791
Gepost:
Gepost:
Could anyone tell me where the antennas are? and how they connect. I know something is supposed to hide behind the antenna bars on the chassi. but I dont see where it connects to these.
Geef details weer
Rep: 61
Gepost:
Hey all, so a while back I had a friend give me an A2159 (2019 MacBook Pro) chassis with everything in it except for the motherboard to toy around with. I decided a little while back that it was time to buy a board off of eBay to see if I can get it working. So, I buy an untested board for 200$ because despite not having the schematics, I have a donor board and all the soldering equipment needed to fix the thing.
So I got it in and it has honestly the weirdest issue I’ve seen on a MacBook. So when it’s plugged in, the haptics on the trackpad instantly start working as soon as it has the power to do so, but the rest of the machine remains completely dead, or so I thought.
So, I decided to risk my fingers to see if I could feel any stupidly hot components anywhere on the board since the power button did nothing at all and the machine never did anything else other than activate the haptics in the touchpad. So the CPU and the small heatshielded area under the CPU gets hot, but the CPU itself gets really freaking hot. It actually feels like the machine is booting, but the wierd part is; not only does the keyboard backlight or touchbar not turn on, but the fan never spins nor does it chime. It’s by far the weirdest issue I’ve seen to date.
Keep in mind that this motherboard has zero signs of water damage either, none of the water sensors are tripped and it’s in great shape. I’ve done the usual unplug everything on the board unless it’s the bare minimum trick and all, but I can’t for the life of me narrow this problem down.
Does anyone know anything about what’s wrong with this motherboard or have any suspicions about what might be the culprit?
I’d rather not spend more on a new one if I can fix it, I also have a multimeter as well so I can also take measurements. Any help whatsoever will 100% be appreciated!
Also yes, I know I won’t have TouchD because the sensor won’t be origina to the board.
Rep: 1
Gepost:
Hello, have you found a solution to your problem since I have the same problem since changing the screen, if you had the solution it would save me because Apple wants to charge me more than 700€ and I don't want to putting so much into a mac repair when there may be another way to repair it for much less. Thanks in advance
Geef details weer
Rep: 829
Gepost:
Hi guys. I’d like to apologize right away if this question is not really appropriate for this forum, but hopefully ifixit community will help me out here as well because I don’t really know a better place to ask. As a rapidly learning fixxer I came to a point when I guess I could benefit from purchasing a thermal camera. I narrowed the choice down to two models: Uni-T Uti260B VS Topdon TC004. I mostly work with small SMD components. Which one would you recommend and why?
Geef details weer
Rep: 1
Gepost:
Bonjour,
Je m'intéresse à la faisabilité de la récupération de données sur smartphones qui ne fonctionnent plus par transplantation des composants, plus particulièrement les iPhone dans un premier temps.
Après pas mal de recherches, j'en suis venu à la conclusion que c'est une manipulation réalisable, du moins en théorie, à condition d'avoir les outils et équipements nécessaires. Cependant, selon les modèles d'iPhone, on a de petites différences dans la manière de procéder.
Tout ça n'est que de la théorie, j'aimerais réaliser dans le futur un ""proof of concept"" en réalisant une transplantation et ensuite tester la robustesse de la méthode si tant est que celle-ci fonctionne en premier lieu. Cependant, je voudrais d'abord maîtriser la théorie avant de passer à la pratique et je manque cruellement de documentation (les constructeurs sont forts pour garder leurs secrets...).
J'ouvre ce sujet majoritairement pour avoir vos retours d'expériences et plus d'informations. Je sais que je suis loin d'être le premier à me pencher sur le sujet ni le premier à essayer une telle opération.
Quelqu'un a-t-il déjà effectué ce genre de transplantations par le passé ? Avez-vous de la documentation technique à ce sujet permettant de mieux comprendre la théorie et surtout le rôle de l'EEPROM dans le chiffrement des iPhone récents ?
Merci d'avance pour vos réponses!
Oeps! Ik zou graag mijn mening herzien.
Uitvouwen / Samenvouwen
Goedkeuren
Omhoog
Afkeuren
Omlaag
Open Help