Ga door naar hoofdinhoud

Sostituzione del gruppo vetro posteriore Samsung Galaxy S8

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 15 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Samsung Galaxy S8 Back Glass Assembly Replacement: stap 0, afbeelding 1 van 1
  • Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

  • Heat an iOpener and apply it to a long edge of the S8 for about 2 minutes.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

  • As you're waiting for the adhesive to soften, move on and read the following step to get an idea of where to pry.

L'apertura del tuo telefono danneggerà le guarnizioni impermeabili. Procurati dell'adesivo di ricambio prima di iniziare; se rimonterai il telefono senza sostituire l'adesivo, in seguito dovrai fare attenzione ad esporlo all'intrusione di liquidi.

Scalda un iOpener e applicalo su uno dei bordi lunghi dell'S8 per circa due minuti.

Dovrai forse scaldare e applicare di nuovo l'iOpener più volte per scaldare a sufficienza il telefono. Segui le istruzioni dell'iOpener per evitare il surriscaldamento.

Puoi usare anche un asciugacapelli, una pistola termica o una piastra riscaldabile, ma stai attento a non surriscaldare il telefono: tanto lo schermo OLED quanto la batteria interna si possono danneggiare con il calore.

Mentre aspetti che l'adesivo si ammorbidisca, vai avanti e leggi il passo seguente per farti un'idea del punto migliore per far leva.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.