Ga door naar hoofdinhoud

Sostituzione Mascherina Anteriore nell'iMac Intel EMC 2134 ed EMC 2211 da 24"

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 2
iMac Intel 24" EMC 2134 and 2211 Front Bezel Replacement: stap 0, afbeelding 1 van 2 iMac Intel 24" EMC 2134 and 2211 Front Bezel Replacement: stap 0, afbeelding 2 van 2
  • The front bezel is still attached to the iMac by the microphone cable.

  • Gently lift the front bezel from its top edge off the rear case. It helps to use your thumbs to push down very gently on the corners of the display.

  • Once the top edge of the front bezel has cleared the rear case, rotate the front bezel toward the stand and lift it off the rear case.

  • When reinstalling the front bezel, start at the lower edge and make sure it is flush with the rear case before lowering the top edge onto the iMac.

La mascherina anteriore è ancora collegata all'iMac mediante il cavo del microfono.

Sollevare delicatamente la mascherina dal bordo superiore, lontano dal case posteriore. Può essere utile premere delicatamente gli angoli del display con i pollici.

Dopo aver rimosso il bordo superiore della mascherina anteriore dal case posteriore, ruotare la mascherina verso la staffa ed estrarla dal case posteriore.

Per la reinstallazione della mascherina anteriore, iniziare dal bordo inferiore e verificare che sia allineata con il case posteriore prima di poggiare il bordo superiore sull'iMac.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.