Repareer je spullen Gemeenschap Winkel

Sostituzione Mascherina Anteriore nell'iMac Intel EMC 2134 ed EMC 2211 da 24"

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Italiaans
Volgende stap

Stap 1 vertalen

Stap 1
iMac Intel 24" EMC 2134 and 2211 Front Bezel Replacement: stap 0, afbeelding 1 van 2 iMac Intel 24" EMC 2134 and 2211 Front Bezel Replacement: stap 0, afbeelding 2 van 2

  • Remove the following 12 screws securing the front bezel to the rear case:

  • Eight 13 mm T8 Torx screws

  • Four 25 mm T8 Torx screws

  • You may have different-length screws depending on your model:

  • Six 13 mm T8 Torx screws

  • Four 25 mm T8 Torx screws

  • Two 35 mm T8 Torx screws

Rimuovere le 12 viti seguenti, che fissano la mascherina anteriore al case posteriore:

Otto viti Torx T8 da 13 mm.

In alternativa, potrebbero esserci sei viti Torx T8 da 13 mm e due da 25 mm.

Quattro viti Torx T8 da 25 mm.

In alternativa, potrebbero esserci due viti Torx T8 da 25 mm (all'esterno) e due da 35 mm (all'interno).

[* black] Remove the following 12 screws securing the front bezel to the rear case:
[* red] Eight 13 mm T8 Torx screws
- [* icon_note] Alternatively, you might have six 13 mm and two 25 mm T8 Torx screws
[* orange] Four 25 mm T8 Torx screws
- [* icon_note] Alternatively, you might have two 25 mm (outer) and two 35 mm (inner) T8 Torx screws
+[* icon_note] You may have different-length screws depending on your model:
+ [* yellow] Six 13 mm T8 Torx screws
+ [* green] Four 25 mm T8 Torx screws
+ [* light_blue] Two 35 mm T8 Torx screws

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.