Ga door naar hoofdinhoud

Google Pixelディスプレイの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 2
Google Pixel Display Replacement: stap 0, afbeelding 1 van 3 Google Pixel Display Replacement: stap 0, afbeelding 2 van 3 Google Pixel Display Replacement: stap 0, afbeelding 3 van 3
  • In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.

  • For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. (The bezels indicate this spacing on the front.)

  • Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

次の手順では、ディスプレイをPixelの筐体に固定している接着剤を切り込みます。

参考のために、ディスプレイパネル裏側の様子が左側の画像で確認できます。ディスプレイユニット端とOLEDパネルの間の狭い隙間にご注意ください。(ベゼルは前面側にこの間隔で表示しています)。

デバイスの側面に1.5mm以上、もしくはデバイス上下に9 mm以上深く開口ツールを差し込んでしまうと、ディスプレイに永久的なダメージを与えてしまいます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.