Ga door naar hoofdinhoud

JBL Flip 3 USB Port Replacement

Engels
Nederlands
Stap 2
JBL Flip 3 USB Port Replacement, Remove Outer Frame Screws: stap 0, afbeelding 1 van 2 JBL Flip 3 USB Port Replacement, Remove Outer Frame Screws: stap 0, afbeelding 2 van 2
Remove Outer Frame Screws
  • Remove the ten screws of the outer frame.

  • Six (6) screws along the thin long edge that are screwed in the chassis

  • Four (4) screws ( 2 per end) holding the ends to the chassis.

  • Reassembly Notes

  • Do not over-tighten screws.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.