Ga door naar hoofdinhoud

PS4 Pro 拆解

Stap 6
PlayStation 4 Pro Teardown: stap 0, afbeelding 1 van 3 PlayStation 4 Pro Teardown: stap 0, afbeelding 2 van 3 PlayStation 4 Pro Teardown: stap 0, afbeelding 3 van 3
  • As expected, we're gonna have to remove these "Warranty void if seal removed" stickers to go any further.

  • Adding a bit of insult to injury, the screws hidden beneath are Security Torx screws—specifically designed to stop you getting in.

  • Luckily, even the most dastardly screw head is no match for our 64 Bit Driver Kit. With the case cracked open, we can remove this large metal shield.

  • Unfortunately, all this does is give us a view of the motherboard's backside.

  • Based on our experience with the PS4 Slim, we decide to flip everything over and see if the grass is any greener on the other side...

意料之中的,为了继续进行下去,我们必须撕毁保修易碎贴。

一个非常不友好的地方,螺丝都藏的很深同时还使用梅花型设计,专门用来防止拆机的。

所幸,尽管在 64 Bit Driver Kit 中没有找到可以用于这梅花螺丝的批头,但是由于机身之间的缝隙,我们还是将机身打开并且也把金属罩也一并拆掉。

不幸的是,废了这么大劲之后我们却只能看到主板的背面。

鉴于对 PS4 Slim 的经验,我们决定先把所有的东西都拆掉然后来看看更诱人的主板正面。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.