Repareer je spullen Gemeenschap Winkel

PS4 Pro 拆解

Terug naar de handleiding
Engels
Chinees
Stap 5
PlayStation 4 Pro Teardown: stap 0, afbeelding 1 van 1

  • And just a couple more Phillips screws later, the 2.5" HGST HTS541010A9E680 hard drive is free from its caddy shackles.

  • While the PlayStation team boasted about the Pro's SATA III support, this stock hard disk drive is rated at 3.0 Gb/s (SATA II).

  • Or is it? According to various online sources, this guy is actually a 6.0 Gb/s HDD. Regardless, at 5400 RPM this platter drive will never reach SATA III speeds and is pretty similar to the drive we found in 2013.

  • No worries, though—armed with the right tools and some elbow grease (and a snazzy new 6.0 Gb/s SSD), you can cut your lag load times in half and get back to gaming.

又是几个十字螺丝后， 日立的 2.5 英寸 HTS541010A9E680 硬盘就被取下了。

PlayStation 团队曾说过自家 4 PRO 的硬盘接口使用的是SATA 3， 但是这块原厂硬盘却是在 3.0 Gb/s 的速率上工作 (SATA 2)。

根据日立官方的说法，这块硬盘的接口确实是SATA 3， 6 Gb/s速率。不过这个硬盘的转速只有5400转／分，所以永远不会达到接口速率瓶颈，同时这块硬盘和我们之前在2013年机型中所找到的很像。

正所谓好钢用在刀刃上，有了SATA 3 接口，凭借着6 Gb/s 的传输速率，你完全可以把硬盘自行更换为SSD， 这样就能大大减少游戏的读盘时间，顺便剁手 XD。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.