Teenage Engineering OP-1 Display Replacement

Engels

Nederlands

Stap 1 vertalen

Stap 1

Open the display cable connector by using a plastic opening tool to flip the latch upwards.
The display is held in place with a mild adhesive. A spudger helps you to get it free.
Now you can unplug the cable and take out the whole display.
After reassembly you want to perform the three function tests (0, 1 and 2) from the OP-1 special start screen. You can enter this menu by holding the COM key when powering up.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.