Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 33 handleidingen die deze stap bevatten.

Stap 3 vertalen

Stap 3
Lift the fan out of the mini for enough clearance to access its connector. Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board. Do not pry at the socket, or you may rip it from the logic board.
  • Lift the fan out of the mini for enough clearance to access its connector.

  • Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board.

  • Do not pry at the socket, or you may rip it from the logic board.

  • Remove the fan.

将风扇提升的足够到的高度来将连接器分离。

小心的将风扇排线连接器从逻辑板的插座中拔出。

移除风扇。

[* black] Lift the fan out of the mini for enough clearance to access its connector.
-[* black] Carefully pull the fan cables upward to lift the fan connector up out of its socket on the logic board.
+[* black] Grab all the wires at once and gently pull ***straight up*** to disconnect the fan from the logic board.
+ [* icon_caution] Do ***not*** pry at the socket, or you may rip it from the logic board.
[* black] Remove the fan.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.