Nerf Alpha Trooper CS-18 Firing Spring Replacement

Engels

Nederlands

Stap 4 vertalen

Stap 4

Keeping the barrel of the device pointing to the left, remove the 14 10mm Phillips #0 screws from the body of the device.
A screw driver extension may be required to remove some screws.
With the device pointing in the same direction, remove the two 5 mm Phillips #0 screws from the body of the device.
With the device pointing in the same direction, remove the two 8 mm Phillips #0 screws from the body of the device.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.