Ga door naar hoofdinhoud

Remplacement de la prise jack de l'iPhone 3G

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 3
iPhone 3G Headphone Jack Replacement: stap 0, afbeelding 1 van 1
  • Remove the following 4 screws:

  • Three 1.8 mm Phillips #00 screws securing the headphone jack and GPS antenna to the rear case. Note the order in which you remove the screws, as the left one has a slightly larger head.

  • One 3.8 mm Phillips #00 screw in the plastic loop near the headphone jack.

Retirez les quatre vis suivantes:

Trois vis cruciformes #00 de 1,8 mm fixant la prise jack et l'antenne GPS au boîtier arrière. Faites attention à l'ordre dans lequel vous retirez les vis, celle à gauche a une tête légèrement plus large que les autres.

Une vis cruciforme #00 de 3,8 mm dans la boucle en plastique près de la prise jack.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.