Repareer je spullen Gemeenschap Winkel

Sostituzione Case Superiore nel MacBook Core 2 Duo

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 38 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Italiaans
Stap 6
MacBook Core 2 Duo Upper Case Replacement: stap 0, afbeelding 1 van 1

  • Remove the two Phillips screws from the optical drive (right) side of the computer:

  • Two 5.2 mm Phillips #00, with shank (2.3mm dia. x 3.25 mm len.) (Head: 3.2 mm. dia. x .5mm thick)

  • It is not necessary to remove the similar screws on the ports (left) side of the computer.

Rimuovere le due viti con testa a croce dal lato con unità ottica del computer.

Due viti con testa a croce n. 00 da 5,2 mm con gambo (2,3mm di diametro x 3,5 mm di lunghezza) (Testa: 3,2 mm di diametro x 0,5 mm di spessore)

Non è necessario rimuovere le viti analoghe sull'altro lato del computer.

-[* black] Remove the two Phillips screws from the optical drive side of the computer.
- [* red] Two 5.2 mm Phillips #00, with Shank (2.3mm dia. x 3.5 mm len.) (Head: 3.2 mm. dia. x .5mm thick)
-[* icon_note] It is not necessary to remove the similar screws on the other side of the computer.
+[* black] Remove the two Phillips screws from the optical drive (right) side of the computer:
+ [* red] Two 5.2 mm Phillips #00, with shank (2.3mm dia. x 3.25 mm len.) (Head: 3.2 mm. dia. x .5mm thick)
+[* icon_note] It is not necessary to remove the similar screws on the ports (left) side of the computer.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.