Repareer je spullen Gemeenschap Winkel

Sostituzione Case Superiore nel MacBook Core 2 Duo

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 38 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Italiaans
Volgende stap

Stap 1 vertalen

Stap 1
MacBook Core 2 Duo Upper Case Replacement: stap 0, afbeelding 1 van 1

  • Remove the following 3 screws:

  • One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)

  • Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)

  • If the screws stick in the case, you can use a magnetized screwdriver to draw them out.

  • The shorter of the three screws goes in the middle of the lower case.

Rimuovere le 3 viti seguenti:

Una vite con testa a croce n. 00 da 11 mm nella parte centrale del case. (Testa: 5 mm di diametro x 0,75 mm di spessore)

Due viti con testa a croce n. 00 da 14,5 mm (testa: 5 mm di diametro x 0,75 mm di spessore)

Se le viti restano incastrate nel case, è possibile utilizzare un cacciavite magnetico per recuperarle.

La vite più corta delle tre va al centro.

[* black] Remove the following 3 screws:
- [* red] One 11 mm Phillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)
+ [* red] One 11 mm Phillips#00 in the middle of the lower case. (Head: 5mm dia. x .75mm thick)
[* orange] Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)
[* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out.
-[* icon_reminder] The shorter of the three screws goes in the middle.
+[* icon_reminder] The shorter of the three screws goes in the middle of the lower case.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.