Repareer je spullen Gemeenschap Winkel

Reemplazo de la carcasa trasera del iPhone 6s Plus

Terug naar de handleiding
Engels
Spaans
Stap 8
iPhone 6s Plus Rear Case Replacement: stap 0, afbeelding 1 van 2 iPhone 6s Plus Rear Case Replacement: stap 0, afbeelding 2 van 2

  • If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

  • Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

  • After about a minute, flip the phone over and use a plastic card to tear through any remaining adhesive.

Si quitaste con éxito las tres tiras adhesivas, continúa con el siguiente paso. De lo contrario, deberás extraer la batería de la carcasa trasera.

Prepara un iOpener y aplícalo en la parte posterior de la carcasa trasera, directamente sobre la batería. Alternativamente, puedes aplicar calor con una pistola de calor o un secador de pelo.

Después de aproximadamente un minuto, voltea el teléfono y usa una tarjeta de plástico para rasgar cualquier resto de adhesivo.

[* icon_note] ***If you successfully removed all three adhesive strips, move on to the next step. ***Otherwise, you will need to pry the battery from the rear case.
[* black] [guide|25705|Prepare an iOpener] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
-[* black] After about a minute, flip the phone over and use a plastic card to tear through any remaining adhesive.
+[* black] After about a minute, flip the phone over and use a [product|IF145-101|plastic card] to tear through any remaining adhesive.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.