Repareer je spullen Gemeenschap Winkel

MacBook Pro 13" Unibody Early 2011 하드 드라이브 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans

Stap 1 vertalen

Stap 1
MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement: stap 0, afbeelding 1 van 2 MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement: stap 0, afbeelding 2 van 2

  • Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.

  • Transfer the hard drive retaining posts to your new hard drive.

  • If desired, transfer the pull tab over to your new drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

  • If you upgraded your EFI Firmware ROM you can also perform an internet recovery.

하드 드라이브 측면에서 6.0mm T6 Torx/톡스 하드 드라이브 고정 포스트 네 개를 풀어주세요.

하드 드라이브 고정 포스트들을 새 하드 드라이브로 옯기세요.

원하는 경우, 당김 탭을 새 하드 드라이브로 옮기세요.

새 하드 드라이브를 설치하는 경우 자사의 OS X 설치 안내서를 사용하여 준비하고 실행 하세요.

EFI 펌웨어 ROM을 업그레이드 한 경우 인터넷 복구를 실행할 수 있습니다.

[* red] Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.
[* black] Transfer the hard drive retaining posts to your new hard drive.
-[* icon_note] If desired, transfer the pull tab over to your new hard drive.
+[* icon_note] If desired, transfer the pull tab over to your new drive.
[* icon_reminder] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.
[* icon_note] If you upgraded your [http://support.apple.com/kb/ht4904|EFI Firmware ROM|new_window=true] you can also perform an [http://www.apple.com/osx/recovery/|internet recovery|new_window=true].

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.