Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 25 handleidingen die deze stap bevatten.

Stap 4
Repeat the heating and cutting procedure for the remaining three sides of the phone. Leave an opening pick under each edge to prevent the adhesive from resealing. Leave an opening pick under each edge to prevent the adhesive from resealing.
  • Repeat the heating and cutting procedure for the remaining three sides of the phone.

  • Leave an opening pick under each edge to prevent the adhesive from resealing.

持ち上げた際の隙間が十分にできたら、背面ガラスとミッドフレームの間に開口ピックを差し込みます。

[* black] Once you've opened a large enough gap, insertRepeat the heating and cutting procedure for the remaining three sides of the phone.
[* black] Leave
an opening pick between the rear glass andunder each edge to prevent the midframeadhesive from resealing.
[* black] Once you've opened a large enough gap, insertRepeat the heating and cutting procedure for the remaining three sides of the phone.
[* black] Leave
an opening pick between the rear glass andunder each edge to prevent the midframeadhesive from resealing.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.