Repareer je spullen Gemeenschap Winkel

Desktop Computer linke Seitenverkleidung ersetzen

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Duits
Volgende stap

Stap 1 vertalen

Stap 1
Desktop PC Left Panel Replacement: stap 0, afbeelding 1 van 1

  • Unplug the computer from the power supply before any maintenance or disassembly.

  • Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.

  • These screws can usually be removed by hand.

  • Be sure to wear an anti-static bracelet or use an anti-static mat to ensure important components are not damaged by static electricity.

Entferne die zwei 5mm Kreuzschlitz #2 Schrauben, die sich auf der Rückseite des Computergehäuses befinden.

Diese Schrauben können manchmal von Hand gelöst werden.

-[* red] Remove the two Phillips #2 head 5mm screws from the back side of the computer case.
-[* icon_note] These screws can be removed by hand.
+[* icon_caution] Unplug the computer from the power supply before any maintenance or disassembly.
+[* black] Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.
+[* icon_note] These screws can usually be removed by hand.
+[* icon_note] Be sure to wear an anti-static bracelet or use an anti-static mat to ensure important components are not damaged by static electricity.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.