Ga door naar hoofdinhoud

iPhone 6 Plusのフロントパネルアセンブリの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Stap 4
iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 1 van 3 iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 2 van 3 iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 3 van 3
  • Pull the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

  • In a pinch, you can use an unopened canned beverage to hold the display.

本体上部先端を蝶番にして、背面ケースからフロントパネルアセンブリのホームボタン端を引き上げます。

約90度の角度でディスプレイを開け、後ろに立て掛けて固定できる衝立を置きます。

ゴムバンドでディスプレイと衝立を留めて動かないようにします。これはディスプレイケーブルがアクシデントで引き伸ばされるのを防ぐためです。

急ぎの場合は未開封の飲料用缶を使用できます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.