Ga door naar hoofdinhoud

iPhone 6 Plusのフロントパネルアセンブリの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Stap 5
iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 1 van 2 iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 2 van 2
  • Several clips along the top edge of the front panel form a partial hinge, allowing the front panel assembly to swing open like a book.

  • During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

フロントパネル上部に留められた幾つかのクリップを蝶番のようにして、本をめくるようにフロントパネルアセンブリを開きます。

再組み立ての際は、クリップが背面ケース上部端のちょうど真下になるように配置します。それからフロントパネル上部先端と背面ケース上部先端が重なるまで上方にスライドします。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.