Repareer je spullen Gemeenschap Winkel

iPhone 6 Plus 前面板组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Stap 13
iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 1 van 2 iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 2 van 2

  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Use a plastic opening tool to disconnect the display data cable connector.

  • When reassembling your phone, the display data cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

用撬棒的平头断开显示排线接口。

重新组装手机时，显示排线可能会从插座上松动，这回导致重开机时屏幕显示白线或者直接白屏。如果出现这种情况，只需再次装好排线并将手机电源重置一次。重置手机电源最好的方式就是将电池排线断开再装上。

+[* icon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Use a plastic opening tool to disconnect the display data cable connector.
[* icon_reminder] When reassembling your phone, the display data cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|29424|disconnect and reconnect the battery connector.|stepid=69596]

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.