DJI Phantom 3 Standard Remote Controller Joysticks Replacement

Engels

Nederlands

Stap 4 vertalen

Stap 4

Separate the other circuit board piece from the joystick connection using a plastic spudger.
The circuit board is wired through glue. If the plastic spudger is unable to pry the glue off, use the metal spudger as a last resort.
Take the joystick module itself and remove the four 8 mm screws that connect the joystick to the housing.
Unscrew the thumb stick from the module if a replacement is not needed.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.