Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 2 vertalen
Stap 2
-
Lift the two wires and plastic piece away from the Wi-Fi board.
-
Remove the single 3 mm screw holding the Wi-Fi board in place using a Phillips #0 screwdriver.
-
Hold the sides of the Wi-Fi board and slide it out of the socket.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.