Repareer je spullen Gemeenschap Winkel

Xbox Series X Vervanging van het achterste paneel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 24 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Nederlands
Volgende stap

Stap 1 vertalen

Stap 1
Xbox Series X (Digital Edition) Back Panel Replacement, Uncover the back panel screws: stap 0, afbeelding 1 van 2 Xbox Series X (Digital Edition) Back Panel Replacement, Uncover the back panel screws: stap 0, afbeelding 2 van 2
Uncover the back panel screws

  • Before you begin, completely power down and unplug all cables from your console.

  • Two stickers cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.

  • Heat an iOpener and lay it on the smaller sticker near the bottom of the back panel for two minutes.

  • Alternatively, you can use a hair dryer to heat the sticker.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

+[title] Uncover the back panel screws
+[* icon_caution] ***Before you begin, completely power down and unplug all cables from your console.***
+[* icon_note] [link|https://guide-images.cdn.ifixit.com/igi/ILtlPEkWqVaaBPqt.full|Two stickers|new_window=true] cover the back panel screws. You can remove the stickers without heating them, though it makes them much easier to remove cleanly.
+[* black] [guide|25705|Heat an iOpener|new_window=true] and lay it on the smaller sticker near the bottom of the back panel for two minutes.
+ [* icon_note] Alternatively, you can use a [guide|157348|hair dryer|new_window=true] to heat the sticker.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.