Repareer je spullen Gemeenschap Winkel

Assemblaggio torcia LED kit di saldatura fai da te

Terug naar de handleiding
Engels
Italiaans
Stap 18
Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Solder the switch: stap 0, afbeelding 3 van 3
Solder the switch

  • Make sure the switch stays flush with the board and the leads stay level with each other while you're soldering. If it becomes crooked, desolder the leads and try again.

  • Solder the three switch leads to the board.

Salda l'interruttore

Accertati che l'interruttore resti a filo con la scheda e i terminali stiano a livello l'uno con l'altro mentre saldi. Se si inclina, dissalda i terminali e riprova.

Salda i tre terminali dell'interruttore alla scheda.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.