Repareer je spullen Gemeenschap Winkel

基础 LED 手电筒 DIY 焊接套件组装

Terug naar de handleiding
Engels
Chinees
Stap 16
Basic LED Flashlight DIY Soldering Kit Assembly, Insert the switch: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the switch: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the switch: stap 0, afbeelding 3 van 3
Insert the switch

  • The switch is symmetrical and can be inserted in any orientation.

  • Place the switch on its outline on the front of the circuit board. Make sure all three leads go through their holes in the board.

插入开关

该开关是对称的，可以以任意方向插入。

将开关放置在电路板正面的轮廓上。确保所有三根导线都穿过电路板上的孔。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.