Repareer je spullen Gemeenschap Winkel

基础 LED 手电筒 DIY 焊接套件组装

Terug naar de handleiding
Engels
Chinees
Stap 12
Basic LED Flashlight DIY Soldering Kit Assembly, Insert the battery connector: stap 0, afbeelding 1 van 2 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the battery connector: stap 0, afbeelding 2 van 2
Insert the battery connector

  • The battery connector is NOT symmetrical and must be oriented correctly using its outline on the board.

  • Place the battery connector on its outline on the front of the circuit board. Make sure the leads go through their holes in the board.

插入电池接口

电池接口不对称，必须根据电路板上的轮廓正确定位。

将电池接口放在电路板正面的轮廓上。确保导线穿过电路板上的孔。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.