Repareer je spullen Gemeenschap Winkel

기본 LED 손전등 DIY 납땜 키트 어셈블리

Terug naar de handleiding
Engels
Koreaans
Stap 5
Basic LED Flashlight DIY Soldering Kit Assembly, Insert the resistor: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the resistor: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the resistor: stap 0, afbeelding 3 van 3
Insert the resistor

  • Hold the circuit board so the front (the side labeled "Let Your Light Shine" at the top) is facing you.

  • The resistor is symmetrical and can be inserted in any orientation.

  • Insert the resistor leads through their holes on the front of the circuit board.

저항기 끼우기

회로 기판의 앞면(상단의 “Let Your Light Shine/빛을 비추세요”라고 표시된 면)이 자신을 향하도록 잡으세요.

저항기는 대칭형이며 어떤 방향으로도 끼울 수 있습니다.

회로 기판 전면의 구멍을 통해 저항 리드를 끼우세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.