Repareer je spullen Gemeenschap Winkel

Assemblaggio torcia LED kit di saldatura fai da te

Terug naar de handleiding
Engels
Italiaans
Stap 5
Basic LED Flashlight DIY Soldering Kit Assembly, Insert the resistor: stap 0, afbeelding 1 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the resistor: stap 0, afbeelding 2 van 3 Basic LED Flashlight DIY Soldering Kit Assembly, Insert the resistor: stap 0, afbeelding 3 van 3
Insert the resistor

  • Hold the circuit board so the front (the side labeled "Let Your Light Shine" at the top) is facing you.

  • The resistor is symmetrical and can be inserted in any orientation.

  • Insert the resistor leads through their holes on the front of the circuit board.

Inserisci il resistore

Tieni la scheda in modo che la parte anteriore (che dice "Let Your Light Shine" in alto) sia rivolta verso di te.

Il resistore è simmetrico e può essere inserito in qualsiasi orientamento.

Inserisci i terminali del resistore attraverso i fori nella parte anteriore della scheda.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.