Ga door naar hoofdinhoud

Changement écran HMD Skyline

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 5
HMD Skyline Screen Replacement, Disconnect the screen: stap 0, afbeelding 1 van 3 HMD Skyline Screen Replacement, Disconnect the screen: stap 0, afbeelding 2 van 3 HMD Skyline Screen Replacement, Disconnect the screen: stap 0, afbeelding 3 van 3
Disconnect the screen
  • Use your fingers to grip a bottom corner of the metal screen-connector cover.

  • Lift the bottom edge of the cover and pull it towards the bottom of your phone to tear the "seal" sticker and remove the cover.

  • During reassembly, slide the tabs on the top edge of the cover under the motherboard cover and use the cutouts near the screw holes to align the cover.

Utilisez vos doigts pour saisir un coin inférieur du cache métallique du connecteur d'écran.

Soulevez le bord inférieur du cache et tirez-le vers le bas de votre téléphone pour déchirer l'autocollant "seal" et retirer le cache.

Lors du remontage, faites glisser les languettes du bord supérieur du cache sous le cache de la carte mère et utilisez les découpes près des trous de vis pour aligner le cache.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.