Ga door naar hoofdinhoud

Logitech G Pro X Superlight Vervanging van de printplaat van het muiswiel

Engels
Nederlands
Stap 6
Logitech G Pro X Superlight Scroll Wheel Board Replacement: stap 0, afbeelding 1 van 2 Logitech G Pro X Superlight Scroll Wheel Board Replacement: stap 0, afbeelding 2 van 2
  • Use your fingers to lift the scroll wheel board assembly straight up and remove it.

  • During reassembly, use the alignment pegs on the shell to help orient the board.

Til de muiswielmodule recht omhoog en verwijder de module.

Gebruik de pinnen in de behuizing, bij het weer in elkaar zetten van de muis, om de printplaat en de module op de juiste plek terug te plaatsen.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.