Repareer je spullen Gemeenschap Winkel

Kobo Libra Colour 전원 버튼 보드 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Koreaans
Stap 7
Kobo Libra Colour Power Button Board Replacement, Soften the motherboard coating: stap 0, afbeelding 1 van 2 Kobo Libra Colour Power Button Board Replacement, Soften the motherboard coating: stap 0, afbeelding 2 van 2
Soften the motherboard coating

  • If you aren't replacing the white interconnect cable skip to this step.

  • Apply a heated iOpener to the interconnect cable's ZIF connector on the motherboard for 90 seconds to soften the coating.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

마더보드 코팅을 부드럽게 하기

흰색 상호연결 케이블을 교체하지 않는 경우 이 단계로 건너뛰세요.

마더보드에 있는 상호연결 케이블의 ZIF 커넥터에 90초 동안 가열된 iOpener를 대어 코팅을 부드럽게 하세요.

대안으로 헤어 드라이어나 히트 건을 사용하여 30초 동안 열을 가할 수 있습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.