Ga door naar hoofdinhoud

Kobo Libra Colour 后盖更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 1 van 3 Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 2 van 3 Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Flip your eReader over so the screen is facing down.

  • Angle an opening pick straight down, and insert its tip under the top right corner of the back cover, near the power button.

  • Push downward and pry up with the pick until you feel it slide between one of the clips and the frame.

  • You may have to test a few spots along the corner until the pick slides between one of the clips.

将电子书翻转过来,让屏幕朝下。

将撬片直向下倾斜,将其尖端插入后盖右上角下方,靠近电源按钮。

向下推,用撬片向上撬,直到感觉撬片在卡扣和框架之间滑动。

您可能需要沿着角落测试几个位置,直到撬片在其中一个卡扣之间滑动。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.