Ga door naar hoofdinhoud

Sostituzione cover posteriore Kobo Libra Colour

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 1 van 3 Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 2 van 3 Kobo Libra Colour Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Flip your eReader over so the screen is facing down.

  • Angle an opening pick straight down, and insert its tip under the top right corner of the back cover, near the power button.

  • Push downward and pry up with the pick until you feel it slide between one of the clips and the frame.

  • You may have to test a few spots along the corner until the pick slides between one of the clips.

Capovolgi il tuo eReader così che lo schermo sia rivolto verso il basso.

Inclina un plettro verso il basso e inseriscine la punta sotto l'angolo in alto a destra della cover posteriore, vicino al pulsante di accensione.

Spingi verso il basso e fai leva con il plettro finché non senti che scorre tra uno dei ganci e la cornice.

Potresti dover provare diversi punti lungo l'angolo finché il plettro non si inserisce tra uno dei ganci.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.